The DLC Listed, full cut-off WF LED wallpacks replace 50W to 250W metal halide wall mounted fixtures while consuming up to 75% less energy and operating for up to 100,000 hours. The expected service life is more than 27 years of nighttime use.
HOUSING / LENS / OPTICS The bronze die-cast aluminum housing, glass lens and stainless steel hardware together make the WF LED Full Cutoff Wallpacks resistant to both weather and vandalism. Produces zero uplight and is Dark Sky compliant.
Both the hinged door and glass lens utilize weatherproof silicone gasketing to seal out contaminants. Lens is tempered clear glass.
LED The WFS LED Wallpack is available in 1014 lumens (13W). The WFM LED Wallpacks are available in 3 light levels; 1,824 lumens (23W), 3,386 lumens (45W), and 5,220 lumens (70W) at 5000K CCT; 80 CRI (typical). LED operating life is 100,000 hours L70. Light engines consist of 10, 20, or 30 LED chip packages mounted to metal core PCB and integral aluminum heat sink.
ELECTRICAL 120-277VAC LED power supply with surge protection. Power factor >0.9.
ACCESS / WIRING The side-hinged door opens easily using two captive stainless steel screws to provide easy access to internal components. Wiring options include mounting over a 4” recessed junction box or surface mounting using convenient conduit entries located on side and bottom of fixture. Additional access holes are provided for optional button photocell.
MOUNTING The recommended wall mounting height of the WFS LED Wallpack is up to 10′, and from 10’ to 24’ for the WFM. Units include rear 1/2” conduit holes access with drill points for mounting.
WF LED fixtures can be mounted to direct light upward or downward (must be mounted facing directly downward for full cutoff applications)
LISTINGS UL Listed wet location, DesignLights™ Consortium listed
WARRANTY 5 years